VD06 SPIN FORGED

Code: VD06 SPIN FORGED

The Varro VD06X Wheel part of our Spin Forged Series features a detailed mesh design and a lightweight & strong barrel for even the most aggressive applications.  Available from 17″ to 22″ ON ORDER and extra-wide fitments up to 12″

$349.00$475.00 inc G.S.T

In Stock

Instructions

What is Spin Forged?

IT’S ALL ABOUT INNOVATION
Rotary Forged or Spin Forged is the technology of Flow Forming a wheel and is one of the most innovative manufacturing processes to enter the wheel industry.  This complex process involves the application of heat and pressure to the inner barrel of the wheel, stretching and compressing the aluminum, which increases the tensile strength of the barrel.   This development shares similar properties to those found in the forging method.

The final product is lighter, stronger and has improved shock resistance as well as an increased load capacity over regular cast wheels.  The major difference between cast and flow-formed wheels is in the thickness of the wheel barrel.   The flow forming process increases the strength of the aluminum allowing the barrel to be made much thinner and lighter than a regular cast wheel.

Image
Image

Image

STEP 1
A specially designed aluminum cast is created with the barrel ready to be Flow Formed.

Image

STEP 2
The wheel now spins at a high rate as it gets heated to allow for the stretching of the material.

Image

STEP 3
Once heated, the rollers press onto the barrel in a downward motion to the required width of the wheel.

Image

STEP 4
As this process finishes, the aluminum strengthens giving the wheel higher impact tolerance.

Fully Pre-Programmed TPMS Sensors – FIT AND FORGET…

STEP 1 – ORDER

Order your TPMS Sensors – Our listings are pre-defined into Make, Model and Year. Once your order has been received, we then carefully, individually and uniquely pre-programme your TPMS sensors. This is not an “off the shelf” operation. Each sensor is pre-programmed and set-up specifically for your vehicle. We’ve spent serious time, development and investment with this step to make it simple and straightforward for you.

STEP 2 – FIT

Fit your new TPMS Sensors – Any experienced Tyre Fitter will be able to carry out this service for you. There’s nothing else that you need to do, the sensors will arrive READY TO FIT. We’ve taken the stress out of this and completed the technical coding of the sensors for you.

STEP 3 – DRIVE

DO NOT ALLOW YOUR TYRE FITTER TO ATTEMPT TO RE-CODE! Just drive your vehicle – To complete the operation, all that is needed is to drive the vehicle. Yes! It really is that easy! On average it takes around 15 minutes on a steady drive to allow the new pre-programmed sensors to communicate back to the vehicle’s systems. Voila! Your TPMS warning light will now be extinguished. Easy Peasy! Obviously there’s a lot more to it, but it all happens behind the scenes when the vehicle is in motion. We are more than happy to go through the finer details but it’s rather long-winded!"

Additional information

Wheel Size

19×8.5, 19×9.5, 20×9, 20×10.5, 19X10

CUSTOM

Dark Tinted Brushed Face, Gloss Black, Gloss Titanium Brushed Face

PCD

CUSTOM

OFFSET

CUSTOM

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.